Cleansol Sodium Hypochlorite (10–12%) | Surface Disinfectant & Sanitizer

Cleansol Sodium Hypochlorite (10–12%) | Broad‑Spectrum Surface Disinfectant, Bleaching & Sanitizing Solution

Product Description:
Cleansol Sodium Hypochlorite is a concentrated disinfectant and bleaching liquid with 10–12% available chlorine. It is widely used for surface disinfection in hospitals, institutions and homes, and for laundry whitening, water tank sanitation and general hygiene maintenance.

Chemical Information

• IUPAC / Common: Sodium hypochlorite solution
• Other Names: Liquid bleach, hypo
• Chemical Type: Oxidizing disinfectant / bleaching agent
• Molecular Formula: NaOCl (in aqueous solution)
• CAS Number: 7681-52-9
• Active Available Chlorine: 10–12%
• Appearance: Clear to pale yellow liquid
• Odor: Characteristic chlorine
• pH (as supplied): ~11–13
• Solubility: Fully miscible in water

Features & Benefits

• Broad‑spectrum surface disinfectant for floors, washrooms and high‑touch areas
• Reliable bleaching, deodorizing and sanitation performance
• Useful for water tank sanitation and laundry whitening
• Economical and easy to dilute for routine hygiene programs

Uses & Applications

• Surface disinfection: floors, walls, equipment, high‑touch points
• Hygiene in hospitals, institutions, residential and public areas
• Laundry bleaching and stain removal
• Water sanitation, waste area cleaning and odor control

Recommended Use Level: Dilute 1 part with 10–50 parts water, depending on soil load and surface.

Storage

Store tightly sealed in HDPE containers in a cool, well‑ventilated place away from heat and direct sunlight. Keep away from acids, ammonia and metals.

Note: Available in standard HDPE containers; typical shelf life 24 months when stored sealed in cool, dark conditions.

Warnings

Strong oxidizer and corrosive. Do not mix with acids, ammonia or detergents—it may release toxic chlorine gas. Avoid contact with eyes/skin and colored fabrics.

Safety & Handling Summary

• Hazard Overview: Corrosive, oxidizing; causes severe eye/skin irritation; decomposes with heat/sunlight.
• PPE: Chemical‑resistant gloves (nitrile/neoprene), protective apron, goggles/face shield; avoid colored clothing—splashes may bleach fabric; use adequate ventilation.
• First Aid: Eyes—rinse with water ≥15 min and seek medical help; Skin—remove contaminated clothing and wash thoroughly; Inhalation—fresh air; Ingestion—do not induce vomiting, seek immediate medical advice.
• Spill & Disposal: Contain with inert absorbent; do not mix with acids/organics; dilute residue with plenty of water and neutralize with sodium thiosulfate; prevent entry to drains; dispose per local regulations.

Technical Support

For TDS/SDS or guidance: info@cleensol.in

Disclaimer

Information is for general reference only. Users must verify suitability and comply with applicable regulations before use. Cleansol assumes no liability for misuse.

Professional Use Declaration

By purchasing this product, I confirm it is solely for my professional and commercial use and will not be used for any personal, medical or pharma purposes. I accept full responsibility for safe handling, storage and disposal.

TYPICAL DATA – FOR REFERENCE ONLY