Cleansol Sodium Hypochlorite 5% – Surface Disinfectant & Sanitizing Solution

Cleansol Sodium Hypochlorite 5% | Surface Disinfectant & Sanitizing Solution

Product Description:
Cleansol Sodium Hypochlorite 5% is a fast-acting surface disinfectant and sanitizing liquid for hard, non-porous surfaces. It supports routine hygiene programs in homes, offices, institutions and public spaces, delivering reliable microbial reduction with convenient spray-and-wipe or mop application.

Chemical Information

• IUPAC: Sodium hypochlorite (aqueous solution)
• Other Names: NaOCl solution, hypochlorite disinfectant
• Chemical Type: Oxidizing disinfectant / sanitizer
• Formula (active): NaOCl
• CAS Number (active): 7681-52-9
• Active Level: 5% w/v available chlorine (approx.)
• Appearance: Clear to pale yellow liquid
• Odor: Mild chlorine-like
• pH (as supplied): ~11–12 (alkaline)
• Solubility: Fully miscible in water

Features & Benefits

• Fast-acting surface disinfectant for routine hygiene
• Wide-surface coverage for floors, walls and high-touch points
• Supports sanitizing programs in homes, offices and institutions
• Spray, wipe or mop application; rinses clean

Uses & Applications

• Disinfection of hard, non-porous surfaces: floors, tiles, counters, washrooms
• High-touch points: handles, switches, railings, tables and worktops
• Housekeeping & hygiene maintenance in offices, schools and public areas

Directions of Uses:
Preparation of 1 Litre Dilute Solution from Sodium Hypochlorite (5%)
0.1% Solution    :  Add 20ml Sodium hypochlorite in 1 LTR of water  
0.5% Solution    :  Add 100ml Sodium hypochlorite in 900 ml of water 
1% Solution       :  Add 200ml Sodium hypochlorite in 800 ml of water 
Always use plastic bucket for making required solution. Chlorine solution gradually loses strength, so freshly diluted solution must therefore be prepared daily.

Storage

Store tightly closed in a cool, shaded, well-ventilated place. Avoid heat and direct sunlight to limit active loss. Keep away from acids, ammonia and reducing agents.

Shipping

Packed in sealed HDPE containers appropriate for oxidizing solutions. Handle upright. Avoid mixing with other chemicals during transport.

Warnings

Irritant and corrosive; handle with care. Ensure adequate ventilation. Avoid contact with eyes and skin. Do not mix with acids or ammonia—dangerous gases may form. Can discolor fabrics and surfaces; wear protective gloves and apron.
Always open, mix & working with solution in a well-ventilated area.
Never use on colored objects & Fabric as it may fade the color. 
Avoid throwing directly on any objects and avoid splashing.
Use gloves and goggles while working with the solution. 
Never mix Solution with acid, ammonia or other cleaners. 
Keep away from kids & pets. Store jar in a cool place away from sunlight.

Safety & Handling Summary

• Hazard Overview: Oxidizing, alkaline liquid; causes irritation/corrosion; harmful if swallowed; may bleach dyes.
• PPE: Gloves, goggles/face shield, protective apron; ensure ventilation.
• First Aid: Eyes—rinse with water for ≥15 min; Skin—wash with water/soap; Inhalation—move to fresh air; Ingestion—rinse mouth, do not induce vomiting, seek medical advice.
• Spill & Disposal: Contain; absorb with inert material; avoid release to drains; neutralize cautiously if trained; dispose per local rules.

Technical Support

For TDS/SDS and application guidance: info@cleensol.in

Disclaimer

Information is for general reference only. Users must verify suitability and follow local regulations and safety practices. Cleansol assumes no liability for misuse.

Professional Use Declaration

By purchasing this product, I confirm it is solely for my professional and commercial use and will not be used for any personal, medical or pharma purposes. I accept full responsibility for safe handling, storage and disposal.