Cleansol LABSA 90% (Linear Alkyl Benzene Sulphonic Acid) | Detergent Acid, Surfactant & Cleaning Agent
Product Description:
LABSA 90% (also known as Acid Slurry) is a high-active anionic surfactant acid used to formulate dishwash liquids, laundry detergents, floor cleaners and general-purpose cleaners. It offers excellent emulsifying, wetting and foaming performance and blends easily with alkali and other surfactants to produce stable liquid or powder detergents.
Chemical Information
-
IUPAC Name: Linear alkylbenzene sulfonic acid
-
Other Names: LABSA, Acid Slurry, Dodecylbenzene sulfonic acid
-
Chemical Type: Anionic surfactant (detergent acid)
-
Molecular Formula: C18H30O3S
-
CAS Number: 27176-87-0
-
Molecular Mass: ~326.5 g/mol
-
Active Matter: 90% ± 1%
-
Free Sulphuric Acid: ≤ 7%
-
Appearance: Brown viscous liquid
-
Odor: Mild characteristic
-
Solubility: Soluble in water and polar solvents
-
Density (25 °C): ~1.05–1.07 g/cm³
Features & Benefits
- High detergency, wetting and emulsifying power
- Excellent foaming; effective soil and grease removal
- Blends well with SLES, CAPB and other surfactants
- Can be neutralized to make LABS (sodium salt) for liquid detergents
- Suitable for both liquid and powder cleaner formulations
Uses & Applications
- Dishwash liquids and pastes
- Laundry detergents (liquid & powder)
- Floor and surface cleaners
- General-purpose cleaning concentrates
Recommended Dosage: Typically 5–25% depending on product type and required cleaning strength.
Storage
Store in corrosion-resistant, tightly closed containers at 20–35 °C away from moisture and direct sunlight.
Note: Available in standard HDPE containers; typical shelf life 24 months when stored sealed.
Warnings
Corrosive. Causes severe skin burns and eye damage. Avoid inhalation of vapors/mist. Do not mix with strong oxidizers or alkalis without proper neutralization procedures.
Safety & Handling Summary
-
Hazard Overview: Corrosive liquid; harmful if swallowed; causes severe irritation/burns.
-
PPE: Chemical-resistant gloves, goggles/face shield, protective clothing and footwear.
-
First Aid: Eyes—rinse with water ≥15 min and seek medical help. Skin—remove contaminated clothing and wash with water/soap. Inhalation—move to fresh air. Ingestion—do not induce vomiting; seek medical advice.
-
Spill & Disposal: Contain with inert absorbent; neutralize cautiously with alkali; prevent discharge to drains; dispose as per local regulations.
Technical Support
For TDS/SDS or formulation guidance: info@cleansol.in
Disclaimer
Information is for general reference only. Users must verify suitability and comply with applicable regulations before use. Cleansol assumes no liability for misuse.
Professional Use Declaration
By purchasing this product, I confirm it is solely for my professional and commercial use and will not be used for any personal, medical or pharma purposes. I accept full responsibility for safe handling, storage and disposal.
TYPICAL DATA – FOR REFERENCE ONLY
