Cleansol Bleaching Powder | Disinfectant & Algae Remover, Bathroom & Water Tank Cleaner
Product Description:
Cleansol Bleaching Powder is a multi-purpose disinfectant and cleaning agent widely used for bathrooms, water tanks, and outdoor areas. Containing ~32 % available chlorine, it eliminates germs, odours and algae buildup on terraces, driveways and pathways — particularly during the rainy season. It whitens tiles, disinfects surfaces and keeps homes and facilities fresh and hygienic.
Chemical Information
Chemical Name: Calcium hypochlorite-based bleaching powder (~32 % available chlorine)
Other Names: Bleaching Powder, Chlorinated Lime
Appearance: White to off-white powder with chlorine-like odour
Solubility: Dispersible in water (prepare fresh solutions for best results)
Key Features & Benefits
- ~32 % available chlorine for effective disinfection and deodorisation.
- Kills bacteria and controls fungus, mould and algae growth on rooftops and tiles.
- Whitens ceramic and grout while removing stains and odours.
- Sanitises water tanks and helps maintain hygienic storage conditions.
- Economical, easy to mix, and suitable for both domestic and institutional use.
Uses
-
Bathroom & Toilet: Tiles, floors, toilet bowls and drains.
-
Water Tanks: Disinfection of overhead and underground tanks.
-
Algae Removal (Rainy Season): Terraces, driveways, stone pathways.
-
Outdoor & Waste Areas: Walls, gutters and smelly drains.
Directions of Use
-
Bathrooms: Dissolve 10–20 g per litre of water (1–2 %) and apply with mop or brush. Leave 10–20 min then rinse.
-
Toilet Bowls: Sprinkle 20–30 g around the bowl or use 2 % solution. Brush and flush after 15 min.
-
Water Tanks: Use 0.2–0.5 % solution (2–5 g per L) for interior scrubbing. Contact time 20–30 min.
-
Rooftops & Pathways: 1–2 % solution (10–20 g per L); pre-wet surface, apply, wait 20–30 min, scrub and rinse.
Quick Mix Guide (Approximate)
| Solution Strength |
Per 1 L Water |
Per 5 L Water |
Typical Use |
| 0.2–0.5 % |
2–5 g |
10–25 g |
Tank washing / light sanitising |
| 1 % |
10 g |
50 g |
Routine mopping / deodorising |
| 2 % |
20 g |
100 g |
Algae removal / heavy-duty cleaning |
Do's & Don'ts
-
Do: Pre-wet algae-covered areas for better penetration.
-
Do: Use plastic or HDPE containers only.
-
Don't: Mix with acids, toilet cleaners or ammonia products.
-
Don't: Store near metal or flammable materials.
Monsoon Cleaning Tip: Prevent slippery green algae on roofs and driveways by using a 2 % bleaching powder solution every 2–3 weeks during the rainy season.
Compatibility: Safe on ceramic, concrete, stone and enamel surfaces. Avoid prolonged contact with painted or metal areas.
Storage
Store in a cool, dry place away from moisture and direct sunlight. Keep container tightly closed and segregated from acids and organic materials.
Warnings
Strong oxidiser — handle with care. Avoid contact with skin and eyes. Use protective gloves and goggles. Do not inhale dust or mix with acidic cleaners.
Safety & Handling Summary
- Use PPE: gloves, mask, goggles when handling bulk powder.
- Rinse eyes/skin with plenty of water if contact occurs.
- Move to fresh air if inhaled and symptoms occur.
- Contain spills with inert material; avoid drain entry.
Technical Support
For SDS/TDS and application guidance, contact:
labchemicals.cleansol@gmail.com
Disclaimer
Information is for general reference only. Cleansol.in does not guarantee fitness for specific applications. Users must verify compatibility and observe safety standards.
Professional Use Declaration
By purchasing this product, I confirm it is solely for my professional and commercial use and will not be used for any personal, or medical purposes. I am aware of its chemical properties and take full responsibility for safe handling, storage and disposal.
Looking for controlled chlorination for pools or water storage? Try Cleansol TCCA-90 Tablets or SDIC Chlorine Tablets for long-lasting residual disinfection.
