Deionized-Demineralized (DM) Water · Since 2002
Perfect 0 TDS.Distilled & Battery Water
Same 0 TDS as distilled water – every dissolved salt removed, it reads a true zero on any TDS meter. For inverter and vehicle batteries, steam irons, humidifiers, coolant mixing, cosmetics and lab work.

Check it yourself
It reads zero. Tap water reads 459.
TDS (total dissolved solids) is every bit of salt and mineral dissolved in water. Each ppm is a little salt that turns into white scale in irons and coats battery plates. DM water has none.
"Truly genuine product, showed TDS of 001, while RO water shows TDS 55 & tap water shows TDS 459." – Yeshu S., verified buyer on Amazon
Our purification process
How Cleansol DM water reaches 0 TDS
Every litre passes through four purification stages, giving the same 0 TDS purity buyers look for in distilled or battery water.
- Four stages: micro filter, RO, ion-exchange resin and UV
- High-quality source water, consistent every batch
- Large-scale production – better value per litre
For inverter and car batteries, steam irons, humidifiers, coolant mixing, cosmetics and general lab work – use it wherever distilled or battery water is needed.
See it work
Watch: the 0 TDS test & battery top-up
Where to use
Wherever you need mineral-free water
Inverter, UPS & solar batteriesTap or RO minerals coat the plates and shorten battery life.
Car, bike & e-rickshaw batteriesTops up lead-acid cells without adding impurities.
Steam irons & steamersNo white flakes, no clogged steam holes.
Humidifiers & air coolersNo white dust on furniture, no scale on pads.
Radiator coolant & washer fluidMix concentrates without adding scale-forming minerals.
Cosmetics, soap & candlesConsistent batches, no mineral reactions.
Schools, colleges & labsRinsing glassware, making general solutions.
Glass, car & solar panelsFinal rinse dries spot-free, no water marks.
DM vs distilled vs RO
Which water is safe for your battery?
| Water | Typical TDS | Batteries & appliances | Why |
|---|---|---|---|
| Tap / borewell | 150–500 | ✗ Not suitable | Scale and plate damage |
| Packaged drinking | 50–150 | ✗ Not suitable | Has added minerals |
| RO purifier | 20–100 | ✗ Not suitable | Still has dissolved salts |
| Distilled water | 0–5 | ✓ Suitable | Also mineral-free |
| Cleansol DM water | 0 | ✓ Suitable | RO + resin + UV – reads zero |
Distilled and DM water are both 0 TDS – what matters for batteries and appliances is that the TDS is zero.

Inverter battery top-up
4 simple steps
- 1Switch off and coolTurn off the inverter or vehicle and let the battery cool down.
- 2Check the levelOpen the cell caps and look at the float indicator or the MIN/MAX marks.
- 3Fill to MAX onlyPour DM water into each low cell up to the upper mark – never overfill, or acid spills out while charging.
- 4Close and check monthlyClose the caps, wipe spills. Check every 1–2 months – more often in summer.
Never add acid. Only water is lost during charging – the acid stays in the battery. Adding acid damages the plates.
Know before you buy
Perfect for these – not for medical use
- Batteries – inverter, UPS, solar, car, bike, tractor
- Steam irons, humidifiers, air coolers
- Coolant and washer fluid mixing
- Cosmetics, soap and candle making
- School and general lab work, rinsing glassware
- Spot-free rinse for glass, cars and solar panels
- Drinking or cooking
- Injections, dialysis, wound or eye care
- CPAP machines, nebulisers, autoclaves or any medical equipment
- Pharmaceutical or analytical lab work (HPLC)
Cleansol DM water is industrial and general-lab grade. Medical equipment such as CPAP needs sterile, certified medical water – ask your doctor or equipment supplier.
Get the most from it
Avoid these 6 mistakes
Minerals coat the battery plates. Do: use only 0 TDS water.
Acid overflows and corrodes terminals. Do: fill only to MAX.
Only water is lost while charging. Do: top up with water only.
Dust and salts raise the TDS. Do: pour with a clean funnel.
Air and dust get in over time. Do: close tightly; keep out of sun.
It is not drinking or sterile water. Do: use for batteries, appliances, labs.
What buyers say
Tested with TDS meters across India
"I have checked it – it has 0 TDS. Don't go for the cheap ones in the market, they don't have 0 TDS and will damage your battery. It provides a long and healthy life to the batteries."
John · Verified purchase · Amazon.in"Packaging was top notch – 5 L sturdy can inside a large zip-lock bag, lid covered by aluminium foil and glued to the can to keep out dust."
Yeshu S. · Verified purchase · Amazon.in"I use this in the steam iron. It has not left any residue inside the water tank or on the sole plate. I am on to my third jerry can. The seal is very strong, doesn't leak."
Rustam · Verified purchase · Amazon.in"Tested it with a TDS meter and it shows zero impurities. Ordered it for my inverter battery. Thousand times better than local brands."
Amazon customer · Verified purchase · Amazon.inChoose your pack
From one steam iron to a battery dealer
2 LSteam iron & one battery top-up
5 LHome inverter – lasts about a year
10 LWorkshops, offices, garages
Battery dealer, workshop or lab?
Factory price, regular supply
WhatsApp your monthly need – we'll send a bulk price with GST invoice and pan-India delivery for 25 L and 50 L packs.

FAQ
Questions, answered
Is this distilled water?
It is DM (deionised) water – the same 0 TDS purity as distilled water, made with micro filtration, RO, ion-exchange resin and UV. Use it wherever distilled water is asked for: batteries, inverters, steam irons, humidifiers, coolant and lab work.
Can I use RO water in my inverter battery?
No. RO water usually has 20–100 TDS. Those salts slowly coat the plates and reduce battery life. Use 0 TDS DM or distilled water.
How often should I top up my inverter battery?
Check every 1–2 months, more often in summer or with heavy power cuts. Top up only when the level is below the MAX mark.
How do I check that it is 0 TDS?
Dip any TDS meter into a clean, dry glass of the water – it should read 0. A dirty glass or wet meter tip raises the reading.
Can I use it in my steam iron?
Yes – it prevents white flakes and clogged steam holes. Most iron manuals recommend demineralised or distilled water.
Can I use it in a CPAP machine or nebuliser?
No. Medical equipment needs sterile medical water. Cleansol DM water is for batteries, appliances and general lab use only.
Can I drink DM water?
No. It is mineral-free industrial water, not drinking water.
Which pack should I buy?
2 L for a steam iron; 5 L for a home inverter (lasts about a year); 10 L for workshops; 25 L and 50 L for battery dealers, labs and factories.
Note: For battery, appliance, cosmetic and general laboratory use only. Not for drinking, cooking or medical use. Keep the can tightly closed, in a clean, cool place away from sunlight and chemicals.

25 L · 50 L